32
33
TROUBLESHOOTING
WARNING:
Before performing any repair work, always ensure that the battery pack
has been removed.
WARNING:
Always wear heavy duty gloves when adjusting or cleaning, especially
when handling sharp objects.
Fault/malfunction Cause
Remedy
Product does not
start
Battery pack not properly
attached
Attach properly
Battery pack discharged
Remove and charge the battery
pack
Battery pack damaged
Contact our service centre
Other electrical defect to the
product
Contact our service centre
Product does not
reach full power
Battery pack capacity too low
Remove and charge the battery
pack
Air vents are blocked
Clean the air vents
Unsatisfactory result
Accessory is worn
Replace with a new one
Accessory not suitable for
intended operation
Use suitable accessory
Product suddenly
stops
Product overloaded
Remove the product from the
workpiece and switch it on again
Battery pack discharged
Remove and charge the battery
pack
Battery pack too hot
Remove the battery pack and let
it cool down
Excessive vibration
or noise
Accessory is dull / damaged
Replace with a new one
Bolts/nuts are loose
Tighten bolts/nuts
CE DECLARATION
To the provisions of Council Directives
We
MEROTEC GmbH,
Otto-Brenner-Straße 8, 47877 Willich/ Deutschland
Declare that the product:
Machine Description: 40V Cordless Chain saw
LS C35W/ GY1792
Function: Cutting Logs
Complies with the essential health and safety requirements of the following directives:
Machinery Directive 2006/42/EC
Electromagnetic Compatibility Directive 2014/30/EC
EC Directive 2011/65/EU and its amendment Directive (EU) 2015/863 (RoHS) *)
Noise Emission in the Environment by Equipment for Use Outdoors Directive
2000/14/EC amended by 2005/88/EC
We additionally confirm the following in accordance with the 2000/14/EC Annex VI
Measured Sound Power Level: 92.8 dB(A) K=2.6 dB(A)
Measured Sound Pressure Level: 81.9 dB(A) K=3 dB(A)
Declared Guaranteed Sound Power Level: 96 dB (A)
Standards and technical specification referred to :
EN 60745-1: 2009/ A11: 2010
EN 60745-2-13: 2009/ A1: 2010
EN 62233: 2008
EN 55014-1: 2006+ A1 +A2
EN 55014-1: 2017
EN 55014-2: 2015
EN 50581: 2012
Authorized Signatory
Date:
24.03.2020
Signature:________________________
Place: Willich
Name: Roland Menken
General Manager
MEROTEC GmbH,
Otto-Brenner-Straße 8, 47877 Willich/ Deutschland
*) The object of the declaration described above satisfies the provisions of directive 2011/65/
EU of the European Parliament and the Council of 8 June 2011 on limiting the use of certain
harmful substances in electrical and electronic appliances.
