background image

30

DECLARATION OF CONFORMITY

To the provisions of Council Directives

We

SUMEC France Sarl

59 bis Rue du Mûrier

37540 Saint Cyr Sur Loire

France

Declare that the product:

Machine Description: 40V CORDLESS LAWNMOWER

LM G46E/ Y0JZ-SP02-4640

Function: Cutting grass

Complies with the essential health and safety requirements of the following directives:

Machinery Directive 2006/42/EC 
Electromagnetic Compatibility Directive 2014/30/EU 
EC Directive 2011/65/EU and its amendment Directive (EU) 2015/863 (RoHS)
Noise Emission in the Environment by Equipment for Use Outdoors Directive 
2000/14/EC amended by 2005/88/EC 
We additionally confirm the following in accordance with the 2000/14/EC amended by 
2005/88/EC emissions guideline, 
Conformity Assessment Procedure as Per Annex III,  
TÜV Rheinland LGA Products GmbH - Tillystraße 2 -90431 Nürnberg
Notified under No. 0197
Measured Sound Power Level (L

wA

 ): 90 dB(A), K=3 dB(A)

Measured Sound Pressure Level (L

pA

 ): 81 dB(A), K=3 dB(A)

Declared Guaranteed Sound Power Level: 96 dB (A)

Standards and technical specification referred to :

EN60335-2-77:2010 
EN 60335-1:2012+A11+A13+A1+A14+A2
EN62233:2008 
EN55014-1:2017 
EN55014-1:2006+A1+A2 
EN55014-2:2015 
EN50581:2012

Authorized Signatory

 

Date: 

24.0

7

.2021

Signature:________________________

Place: Saint Cyr Sur Loire

Name: Rodolphe Dubois

General Manager

SUMEC France Sarl

59 bis Rue du Mûrier, 37540 Saint Cyr Sur Loire, France

Summary of Contents for LM G46E

















Reviews: