24
25
OPERATION
Adjust the height of t
he t
elescopic tube
The telescopic handle is fully height adjustable and can be adapted to suit your height.
Warning:
Do not turn on the switch when you adjust the swivel handle. This can cause a
serious injury.
1.
Attach the swivel handle.
2.
Open the lock button,
one
hand holding the tube the other hand holding the handle
pull up
3.
P
ull the pole to the app
ropriate length, press the lock button, lock the tube intact.
4.
Push lock-off button forward and press switch.
Adjust the working head angle
Hold the handle tightly. Press the lock button up and then turn the cutter head to the desired
position.Release the lock button again and check whether the cutter head is locked in place.
Warning!
Remove the battery pack before adjusting or changing the moveable blade or
cleaning.
Insert the battery pack
- Align the tongue on the battery cartridge with the groove in the housing and slip it into
place.
To switch on:
1. Push lock-off button forward and depress the switch trigger.
2. Release the lock-off button again.
To switch off:
Release the on/off switch.
MAINTENANCE AND STORAGE
Maintenance
1. Always switch the product off, disconnect the battery pack and let the product cool down
before performing inspection, maintenance and cleaning work.
2. Keep the product clean. Remove debris from it after each use and before storage, using a
soft damp cloth.
3. Regular and proper cleaning will help ensure safe use and prolong the life of the product.
4. Inspect the product before each use for worn or damaged parts. Do not operate if you find
broken or worn parts.
WARNING!
Only perform repairs and maintenance work according to these instructions. All
further works must be performed by a qualified specialist.
Cleaning
Before cleaning, inspecting or repairing your unit, make sure that the motor has stopped and
is cool. Disconnect the battery pack to prevent accidental starting.
Note! To ensure the best performance of your product, it is important to keep it clean. Always
clean your tools immediately after use.
Do not allow grass cuttings and other debris to become dry and hard on any of the product
surfaces. This will directly affect the cutting performance. Never clean the product with a
water jet or high pressure cleaner. The motor must remain dry. Do not use aggressive cleaning
agents such as cold cleaner or petroleum ether.
1. Clean the product with a dry cloth. Use a brush for areas that are hard to reach.
2. Oil the cutting tool. Spray oil on all sides of the blades.
NOTE!
Do not use chemical, alkaline, abrasive or other aggressive detergents or disinfectants
to clean this product as they may cause damage to the cosmetic surfaces.
Transportation
1.
Switch the product off and disconnect the battery pack from the machine before
transporting it anywhere.
2.
Attach transportation guards, if applicable.
3.
Always transport the product by its handle. When lifting the product use the
transportation handle as an aid.
4.
Protect the product from any heavy impact or strong vibrations which may occur during
transportation in vehicles.
5.
Secure the product to prevent it from slipping or falling over.
Storage
1.
Clean the product as described above and disconnect the battery pack.
2.
Store the product and its accessories in a dry, frost-free area.
3.
Always store the product in a place that is inaccessible to children. The ideal storage
temperature is between 10°C and 30°C.
4.
We recommend using the original packaging for storage or covering the product with a
suitable cloth or enclosure to protect it against dust.
