20
21
Parts description
1.
Working angle adjustment button
2.
Shrub trimming blades
3.
Tube lock lever
4.
Auxiliary wheels
5.
Safety button on the main body
6.
On/Off trigger on the main body
7.
Tube height adjustment lever
8.
Safety button on the telescopic swivel handle
9.
On/Off trigger on the telescopic swivel handle
10. Battery pack
Checking the box contents
a.
Battery pack
b.
working head with hedge trimmer
c.
d.
Shrub trimming blade
e.
Auxiliary wheels
f.
Reciprocating blade
g.
Manual
h.
Telescopic swivel handle
i.
Charger
DESCRIPTION OF PRODUCT
OPERATION
Charging the battery
Warning! Do not use other battery chargers.
Observe correct mains voltage, it should be between 230-240V~ 240V. Do not continue to
press the On/ Off switch after the machine has been automatically switched off. The battery
can be damaged.
The battery is supplied partially charged. To ensure full capacity of the battery, completely
1.
Connect the battery with charger. The Indicator shows red when normal charging.
2.
The Indicator will show green when battery pack has been fully charged.
Choose the required blades
The blade can be changed rapidly and expediently without any tools. To change the blade,
1.
2.
3.
Remove the blade cover upwards.
4.
Take off the blades and install another blades.
Warning!
DO NOT operate the switch before the blade cover is installed. Risk of injury!
Install the blade cover following the steps.
1.
Insert the blade cover align the two lines marked in the upper figure.
2.
Push the blade cover forwards until the retainer fit
s
in a suitable
position.
1
2
1
2
4
5
6
7
8
9
10
3
a
i
b
c
d
e
f
g
h