manualshive.com logo in svg

Yard force LH A17, Original Instructions Manual, Page: 24 / 27

Share
Download
Yard force LH A17 Original Instructions Manual Download Page 24

24

MAINTENANCE AND STORAGE

Maintenance

1. Always switch the product off, disconnect the battery pack and let the product cool down 

before performing inspection, maintenance and cleaning work.

2. Keep the product clean. Remove debris from it after each use and before storage, using a 

soft damp cloth.

3. Regular and proper cleaning will help ensure safe use and prolong the life of the product.
4. Inspect the product before each use for worn or damaged parts. Do not operate if you find 

broken or worn parts.

WARNING!

 Only perform repairs and maintenance work according to these instructions. All 

further works must be performed by a qualified specialist.

Cleaning

Before cleaning, inspecting or repairing your unit, make sure that the motor has stopped and 
is cool. Disconnect the battery pack to prevent accidental starting.
Note! To ensure the best performance of your product, it is important to keep it clean. Always 
clean your 3.6V cordless mini grass & hedge trimmer immediately after use.
Do not allow grass cuttings and other debris to become dry and hard on any of the product 
surfaces. This will directly affect the cutting performance. Never clean the product with a 
water jet or high pressure cleaner. The motor must remain dry. Do not use aggressive cleaning 
agents such as cold cleaner or petroleum ether.

1. Clean the product with a dry cloth. Use a brush for areas that are hard to reach.
2. Oil the cutting tool. Spray oil on all sides of the blades.

NOTE!

 Do not use chemical, alkaline, abrasive or other aggressive detergents or disinfectants 

to clean this product as they may cause damage to the cosmetic surfaces.
Spare parts/Replacement parts
Plastic blades may be replaced by the consumer. Spare parts are available at an authorised 
dealer or through our customer s44(0)1904 727513

Charger

1905ZA003

Battery pack

1905ZA002

Shear blade

1905ZA004

Hedge trimmer blade

1905ZA005

Repair

This product does not contain any parts that can be repaired by the consumer other than 
those covered in the maintenance section.
Contact an authorised service center or a similarly qualified person to have it checked and 
repaired.

Transportation

1.  Switch the product off and disconnect the battery pack from the machine before 

transporting it anywhere.

Summary of Contents for LH A17




























Reviews:

No comments