20
Charging the battery pack
As shown in
Fig12
NOTE!
Remove the battery pack from the charger after it has been fully charged .
NOTE!
This battery pack has been shipped in a low charge condition,it should be fully
charged before first use.
NOTE!
make sure the main voltage is the same as rating label which located on the
charger.
1. Connect the charger to a power supply. You will hear a beep sound .and the green LED
Light will be on .
2. To insert the battery pack into the charger, align the raised ribs of the battery pack with
the grooves of the charger, then push it in. Ensure the battery pack is in its place.
3. The charger will communicate with the battery pack’s circuitry to evaluate the capacity of
the battery pack. Charging status as following chart:
Fig 12
To charge the battery pack
R G1
G2
G3
G4
R: Red light
G: Green light
R
G1 G2 G3 G4
Q>95%
80%<Q<95%
30%<Q<80%
Q<30%
Q: battery pack, capacity
Flash ON OFF
OPERATION
Summary of Contents for LB G20A
Page 2: ......
