Yard force LB G18 Original Instructions Manual Download Page 7

12

13

GENERAL SAFETY WARNINGS

GENERAL SAFETY WARNINGS

SERVICE

Have your power tool serviced by a qualified repair 
person using only identical replacement parts. This will 
ensure that the safety of the power tool is maintained.

TRAINING

1.  Read the instructions carefully. Be familiar with the 

controls and the proper use of the appliance.

2.  Never allow children, persons with reduced physical, 

sensory or mental capabilities or lack of experience 
and knowledge or people unfamiliar with these 
instructions to use the machine.

3.  Never allow people unfamiliar with these instructions 

to use the appliance. Local regulations may restrict 
the age of the operator.

4.  Never operate the appliance while people, especially 

children, or pets are nearby.

5.  The operator or user is responsible for accidents or 

hazards occurring to other people or their property.

PREPARATION

1.  While operating the appliance, always wear 

substantial footwear and long trousers.

2.  Do not wear loose clothing or jewellery that can be 

drawn into the air inlet. Keep long hair away from the 
air inlets.

3.  Wear protective goggles while operating.
4.  To prevent dust irritation the wearing of a face mask 

is recommended.

5.  Before using, check the batteries or battery packs for 

damage. Do not use the appliance if the batteries or 
battery pack is damaged.

6.  Never operate the appliance with defective guards or 

shields, or without safety devices, for example debris 
collector in place.

MAINTENANCE AND STORAGE

1.  Keep all nuts, bolts and screws tight to be sure the 

appliance is in safe working condition.

2.  Replace worn or damaged parts.
3.  Use only genuine replacement parts and accessories
4.  Store the appliance only in a dry place.

Summary of Contents for LB G18


















Reviews: