Yard force LB G18 Original Instructions Manual Download Page 13

24

25

TECHNICAL DATA

Model

LB G18

Mains voltage

40 V       

Maximum Air Velocity

185 km/h

Air Volume

550 CFM

Weight

2.3 kg

Sound pressure level: L

pA

78.8 dB(A) K=3 dB(A)

Sound power level: L

wA

94.3 dB(A) K=3 dB(A)

Guaranteed sound power level L

wA

98 dB(A)

Vibration front handle

1.7 m/s

2

, K=1.5 m/s

2

Battery pack Model

B0P-SP04-4025ZA

Battery capacity

40 V      , 2.5 Ah

Battery charging time.

50 min

Battery charger Model

VDE: B0Q-SP03-4030ZA

BS: B0Q-SP03-4030ZB

Input

220-240 V AC,  50/60 Hz 160W

Output

40 V      , 3 A

Protection class

II

The declared vibration total value has been measured in accordance with a standard test 
method and may be used for comparing one tool with another;

The declared vibration total value may also be used in a preliminary assessment of exposure.

NOTE: 

The vibration emission during actual use of the power tool can differ from the declared 

value in which the tool is used; In order to protect the operator, user should wear gloves and 
ear protectors in the actual conditions of use.

DESCRIPTION OF PRODUCT

Parts description (Fig. A)

1. Speed/Cruiser lock lever
2. Lower Tube
3. Flat nozzle
4. Air inlet
5. Trigger Switch
6. Control panel
7. Battery pack release button
8. Battery pack

Delivery contents (Fig. B)

Carefully unpack the appliance and check that it is complete. Dispose of the packaging 
material correctly.

a.  40V cordless blower
b.  Lower round tube
c.  Lower flat nozzle
d.  Battery pack
e.  Charger
f.  Manual

WARNING: 

If any parts are damaged or missing, do not operate this tool until these 

parts are replaced. Failure to heed this warning could result in serious personal 
injury.

NOTE:

 Always recycle the packaging in accordance with local recycling guidelines.

Summary of Contents for LB G18


















Reviews: