background image

19

TECHNICAL DATA

Input voltage rating

230 V~, 50 Hz

Input power

2000 W

Working pressure

11 MPa

Max pressure

15 MPa

Flow rate

5.5 l/min

IP number

IPX5

Safety class

Class II

Inlet pressure

0.6 MPa

Supply water temperature (max.):

40 

o

C

Measured sound pressure level (L

pA

)

78.2 dB(A), K=3 dB(A)

Measured sound power level (L

wA

)

92.7 dB(A), K= 3 dB(A)

Guaranteed sound power level (L

wA

)

96 dB(A)

Vibration

<2.4 m/s

2

,k=1.5 m/ s

2

Weight

12.3 kg

The sound values have been determined according to the noise test code given in EN 60335-
2-79, using the basic standards EN ISO 11203 and EN ISO 3744.

The sound intensity level for the operator may exceed 80dB(A) and ear protection measures 
are necessary.

The declared vibration value has been measured in accordance with a standard 
test method (according to EN 60335-2-79) and may be used for comparing one 
product with another. The declared vibration value may also be used in a preliminary 

assessment of exposure.

WARNING:

 Depending on how the product is actually used, the vibration values 

can differ from the declared total! Adopt proper measures to protect yourself against 
vibration exposures. Take the whole work process, including times the product is 
running under no load or switched off, into consideration. Proper measures include, 
among others, regular maintenance and care of the product and its attachments, 
keeping hands warm, regular breaks and proper planning of work processes.

Summary of Contents for EW U15




























Reviews: