12
13
• Always disconnect the product from the power supply:
- When leaving the product unattended.
- Before clearing a blockage.
- Before checking, cleaning or working on the
product.
- When the cord becomes damaged or tangled.
- Whenever the product starts vibrating abnormally.
• WARNING:
Do not direct the jet against yourself or
others in order to clean clothes or footwear.
• Vehicle tyres/tyre valves are susceptible to damage
from the high-pressure jet and may burst .The first
indication for this is a discolouration of the tyre.
Damaged vehicle tyres/tyre valves are perilous. Keep
a minimum jet distance of 30cm during cleaning.
• WARNING:
Risk of explosion - Do not spray
flammable liquids.
• WARNING:
There is a risk of kickback and sudden
torque load against the jet spray when the spray gun
is opened. Ensure that you have stable footing and
that you are holding the gun securely, otherwise you
could injure yourself or other people.
• Never use replacement parts or accessories not
provided or recommended by the manufacturer.
• WARNING:
Do not use the appliance if the supply
cable or any other important parts of the appliance are
damaged, e.g. safety devices, high-pressure hoses or
the trigger gun.
• Avoid using the product in bad weather conditions
especially when there is a risk of lightning.
• If the cord becomes damaged during use, disconnect
the cord from the supply immediately. DO NOT
TOUCH THE CORD BEFORE DISCONNECTING THE
SUPPLY.
• Do not use the product if the cord is damaged or
worn.
• Do not expose the product to rain.
Maintenance and storage
• Disconnect the product from the power supply (i.e.
remove the plug from the power supply or the battery
pack) and check for damage after use.
• Disconnect the product from the power supply (i.e.
remove the plug from the power supply or the battery
pack) before carrying out maintenance or cleaning
work.
• Leave the hose connected to the machine and spray
gun while the unit is pressurised. It is dangerous to
detach the hose while the unit is pressurised.
• Use only the manufacturer’s recommended
replacement parts and accessories.
• Inspect and maintain the product regularly. Have the
product repaired only by an authorised service centre
or similar qualified specialist.
• When not in use, store the product out of the reach of
children.
Vibration and noise reduction
To reduce the impact of noise and vibration emission,
limit the time you use the machine, use low-vibration and
low-noise operating modes as well as wearing personal
protective equipment.
PRODUCT SAFETY WARNINGS
PRODUCT SAFETY WARNINGS
