background image

24

25

Hold the hand-held spray gun and the jet tube firmly with both hands. Unlock the safety 
button and press the trigger on the handheld spray gun. 
The high-pressure pump starts running as soon as you operate the hand-held spray gun.
The high-pressure pump stops running as soon as you release the trigger on the hand-held 
spray gun.

CAUTION:

 Jet spray adjustment is very aggressive. Do not adjust while spraying.

If there is still air in the equipment, please proceed as follows:

Bleed the supply hose:

1.  Remove the quick connection for the garden hose adapter on the water connection and 

open the water tap until water with no bubbles emerges.

2.  Close the water tap.
3.  Connect the supply hose to the equipment with the aid of the quick connection for the 

garden hose adapter 

4.  Fully open the water tap.

Bleed the equipment:

1.  Switch on the equipment at the on/off switch until the pressure has built up.
2.  Switch off the equipment at the on/off switch.
3.  Depress the start lever on the spray gun until the pressure is released.
4.  Please repeat steps 5-7 several times until there is no further air in the equipment.

Using the detergent bottle. (Fig. P)

1.  Stop the machine.
2.  Add detergent to the bottle.

OPERATION

MAINTENANCE AND STORAGE

Overview of cleaning

1.  Clean the machine. Wipe the unit with a slightly damp cloth. Do not clean the machine 

using a high-pressure water jet. 

 

-

Clean the high-pressure nozzle with needle. 

(Fig. Q)

The pressure washer is equipped with a water filter to protect the pump. If the filter is not kept 
clean, the water flow to the machine will be restricted and the pump may be damaged.
1.  To clean water filter, remove transfer adapter and take out filter.
2.  Rinse filter until it is free of debris and blockages.
3.  Replace the filter and inlet adapter.

Storing

Store the machine in a dry and well ventilated area.
When the machine is not going to be used for an extended period of time, ensure to remove 
the cleaning agent and drain all remaining water from the hose.

Transport

Daily use

 

-

Pull out the transport handle until it audibly snaps into place. Pull the appliance by its 
transport handle.

 (FIG. R)

If shipping, use the original packaging wherever possible.

Disposing of the machine

This machine must not be disposed of in household rubbish. You must dispose of such old 
electrical and electronic appliances separately.
Please check with your local authority how to correctly dispose of your old machine.

Disposing of the packaging

The packaging consists of cardboard and correspondingly marked sheets that should be 
recycled. Ensure to recycle this packaging in line with local recycling guidelines.

Summary of Contents for EW N16
















Reviews: