![background image](http://html1.mh-extra.com/html/yard-force/em-n34a/em-n34a_instructions-manual_3242581008.webp)
14
15
Model
EM N34A
Rated voltage/frequency
230–240 V~/50 Hz
Rated power
1400 W
Protection class
II
IP rating
IPX4
Max. rpm
3500 min
-1
Cutting width
340 mm
Cutting height
20-70mm, 6 positions
Capacity of grass bag
35 l
Weight
10.6 kg
Measured sound pressure level (L
pA
)
81.8 dB(A) K=3 dB(A)
Measured sound power level (L
wA
)
94.58 dB(A), K=1.72 dB(A)
Guaranteed sound power level
96 dB(A)
Vibrations
0.78 m/s (K = 1.5 m/s
2
)
The noise and vibration values were determined in accordance with EN 60335-2-77:2010.
The vibration emission values during actual use of the device may deviate from the declared
values. This is independent of the way the device is used.
Users must take all safety precautions to protect themselves. They must consider all
influences of the actual application conditions (especially all parts of the work cycle such as
running times, idling times and times at which the machine is shut off). The vibration values
may deviate from the stated total output depending on the actual use of the device.
Suitable measures include regular maintenance and servicing of the device, keeping
your hands warm, taking regular breaks and properly planning the work sequences!
TECHNICAL DATA
DESCRIPTION OF PRODUCT
Parts description (Fig. A)
1. Handle grip (top)
2. Pull relief (for the power cable)
3. Quick-release lever (handle joint)
4. Bottom part of handle
5. Collecting bag
6. Connecting piece (2x)
7. Carry handle
8. Cutting height lever
9. Motor unit
10. Handle mount
11. Quick-release lever (handle mount)
12. Discharge flap
13. Fill level indicator
14. Cable clamps (2x)
15. Safety switch with power cable
16. Safety bar
Check the delivery parts (Fig. B)
Remove the machine from its packaging carefully and make sure that all of the following parts
are present:
a. Lawnmower with upper handle
b. Lower handle
c. Grass bag
d. Quick-release lever (handle joint)
e. Connecting piece (2x)
f.
Quick release clamp (fixed in screw) x2
g. Cable clamps (2x)
h. Pull relief (for the power cable)
i.
Manual
WARNING:
If any parts are damaged or missing, do not operate this tool until
these parts have been replaced. Failure to heed this warning could result in serious
personal injury.
NOTE:
Always recycle the packaging in accordance with local recycling guidelines.