![background image](http://html1.mh-extra.com/html/yard-force/compact-400ris/compact-400ris_installation-manual_3177104010.webp)
16
17
GB
GB
Troubleshooting
Robotic Mower cannot dock with docking station
•
Check that the boundary wire in front and underneath the charger is in a straight line.
•
Check that the docking station's position is suitable as explained in this manual.
Robotic Mower runs in circles while mowing or while following
boundary wire back to docking station.
•
Verify that no power cable runs parallel and in close proximity the boundary wire. If
necessary, reposition the boundary wire.
•
Check if a front wheel is stuck.
•
If a neighbor has a similar Robotic Mower, the signals may interfere. Try setting your docking
station and Robotic Mower are set to the alternative boundary signal.
•
Driving motor may be damaged, please contact customer support/
The Robotic Mower is noisy.
•
Inspect the blade fixing screws; tighten if necessary.
•
Inspect the blades for damage; replace if necessary.
•
Grass may be too high. Try increasing the cutting height, or mow the lawn with an ordinary
lawnmower first.
•
Cutting motor failure, please call after sales service.
Mower remains at or returns to docking station when pressing START
button
•
Check if the mower has already completed the programmed working time for that day.
•
Battery is low, let give the Robotic Mower time to charge and try again.
LED signal indicator on docking station
S1
S2
S1
S2
S1
S2
S1/S2 indicator lights on.
Broundary wire signal in good condition
S1/S2 indicator flashes.
Broundary wire broken, no signal.
S1/S2 indicator Flashing alternately.
Mower is charging in the docking station.