Elevated Garden Planter Assembly Manual
4
YardCraft.com [email protected] 171 Jalyn Drive New Holland PA 17557 1-844-442-1615
Place the Long Side Boards into the notch in the Long
Bottom Rail with the groove down. Place the second and
third Long Side Board in place, interlocking onto the
previous Side Boards. Ensure Posts are level both ways.
Fasten to Post with 1” Screws through pre-drilled holes.
Keeping all the Posts level both ways, repeat step 9 to
install the opposite side Long Side Boards.
Keeping all the Posts level, using steps 9 and 10, install
the Short Side Boards.
Place the Short Top Rail on top of the Post with the Side
Boards going into the notch. Fasten to the Side Boards
with 2” Screws through pre-drilled holes.
Repeat step 12 to install the opposite end Short Top
Rail.
Using steps 12 and 13, install the two Long Top Rails.
Step: 7
Step: 8
Step: 9
Step: 12
Step: 11
Step: 10
Notice the
grooves in
the Side
Boards
(6) 1 1/4” Screws at each end
2” Screws
