YANXUAN YX-ETS001, Installation Manual

Page: 9 / 16

Do not distort or damage the supply hose to avoid any leakage.
Do not use water supply hose and other accessories of other brands, which may cause danger.
Do not recommend to use our old water supply hose and accessories, which may cause danger.
07
Installation and disassembly of main unit
Installation
Push the washlet back onto the base
plate until a “click” is heard.
Disassembly
Press the “removal button” on washlet,
until a “click” is heard, and pull it out.
Installation
Disassembly
Note:
Before pulling out the washlet, release hand from
“removal button”.
1.Side inlet: Install the 3-way valve onto
the toilet, then attach the water supply
hose and the washlet inlet hose into 3-way
valve. Connect L-shaped end of water
supply hose to the washlet inlet connector.
2.Bottom inlet: Connect water supply on
the inlet connector, then put supply hose
and power line through the relevant holes,
finally install seat cover.
Note:
Connecting the water supply pipe
Connect with smart unit water inlet
3-way valve
Angle Valve
Water supply hose
Power line hole
Water supply hole
此处修改