Yanmar ViO80-1A, User Operation And Maintenance Manual

Page: 160 / 215

2 Maintenance precautions
143
2.2.10 Soldering
If you need to solder, respect the following points :
• Disconnect the battery cabling (negative terminal then positive terminal).
• Disconnect the operator display station before performing a welding operation.
• Ground the machine no more than 1 metre away from the part to be welded.
• Make sure there are no seals or bearings between the soldered part and the earthed part.
• Do not earth near the axes of the equipment or the hydraulic cylinder.
2.2.11 Waste processing
• Always drain the machine's oil into a safe container
and never directly onto the ground.
• When you get rid of toxic waste such as fuel, oil,
cooling water, solvents, filters and used batteries, re-
spect the regulations that apply to this subject.