37
OPE_EF312T&352T_en.doc
5. Driving on a road
WARNING
1) Make sure that left and right brake pedals are
connected whenever traveling on a road or cross a
farm ridge. One-sided braking effect will roll over
the tractor or result in a sharp turn.
2) Follow the traffic regulations and rules in your place
when running on a road. Strictly one operator only
on tractor.
CAUTION
Remove an implement when traveling on a road. If
not, an accident may result in.
Put the PTO shift lever in “N”.
(1) Connect right and left brake.
(2) Shift PTO shift lever to “N” position.
(3) Open hydraulic stop and slow return valve fully.
(A) Hydraulic stop and slow return valve
(OP) Open valve
(4) Move position control lever up and lock it with
stopper.
CAUTION
Make sure that position control lever is held when
traveling on a road. If not, hand may touch position
control lever incidentally and implement would go
down. It may cause an accident and injury.
(A) Brake pedals (B) Connector
(D) PTO shift lever
(A) Position control lever (B) Stopper
(UP) Raise rear hitched implement
IMPORTANT
1) Adjust the traveling speed with the foot accelerator
pedal.
2) When you turn tractor or change traveling course,
notify others by turning signal lamp.
3) When there is on-coming vehicle in night time, make
headlight be low beam.
4) Disengage front wheel drive except in special case.
