10
OPE_EF312T&352T_en.doc
Use care when pulling loads or mounting heavy
implement.
1) Use only approved hitch points.
2) Limit loads to that which you can safely control.
3) Limit travel speed to that you can safety control.
4) Do not turn too sharp.
5) Use care when backing.
6) Install proper ballast which is suggested in the
operator’s manual.
Driving forward out of ditch or mired conditions or up a
steep slope could cause tractor to tip over rearward. If
the mud is deep enough it keeps the wheels from
turning, the tractor will rotate up and backwards around
the axle very quickly. When caught in mired conditions,
do not remove implement or ballast weight and always
back out.
STAY CLEAR OF PTO
PTO master shield (A) should be in place at all times.
PTO shaft safety guard (B) should be installed when
PTO system is not in use.
Make sure the tractor PTO speed is matched to the
implement’s required PTO speed.
Do not drive or operate implement beyond the tractor’s
PTO speed.
Stop engine and be sure PTO has stopped before:
1) Connecting or disconnecting PTO shaft.
2) Making any adjustment to PTO drive and 3-point
hitch.
3) Adjusting, cleaning and servicing PTO driven
implements.
