Yanmar CSS, Original Instructions Manual

Page: 12 / 23

Installing the spreader
11
6- Connect the harness from the rotation sensor to the main
harness at the right side.
7- Attach the cover at the rear of the spreader.
Parts for installation

Nut M8 (4pcs)

Spring washer (4pcs)

Bolt M8 x 16 (4pcs)
8- Remove the sleeve from the winnower drive pulley shaft.
Parts to remove

Nut M20

Collar 36 x 45 x 56

Spring washer

Collar 21 x 64 x 10
[Reference]
The
“
collar 36 x 45 x 56
”
is not required once the pulley is
installed.
9- Install the spreader drive pulley to the winnower drive pulley
shaft.
Parts for installation

V-pulley 298 C1

Nut M20

Spring washer

Collar 21 x 64 x 10
10- Install the central belt pulley assembly to the left side of the
thresher frame.
Parts for installation

Central belt pulley assembly

Nut M8

Spring washer M8

Bolt (flat spring washer) M8 x 20 (4pcs)