CH1900 Series Electronic Control Installation Manual
Page 4
Overview
PARTS SuPPLIED
1. Port control with mounting kit
. Starboard control with mounting kit
. Handle kit
4. CP100 operator panel with mounting kit
5. CE41400 cable harness
6. CH67019D Control Interface
The CH1900 Series Control and CP100 Operator Panel are designed to be used with the Yanmar electronic
control system. This manual provides installation details of the control heads and operator interface panel. For
installation of other electronic components, calibration, operation, and other technical information, refer to the
Electronic Control System Installation and/or Operation Manual that is provided with each system.
The CH1900 series control consists of individual port and starboard single lever control heads, a CP100 Operator
Panel, CE41400 interface harness, and mounting hardware. Each CH1900 control is provided with individual
adjustment screws to change detent position firmness and/or drag (rotational resistance) so the system can be
tailored to the operator’s preference.
SPECIAL TOOLS REquIRED
1. 1-3/4 inch (45 mm) diameter hole saw
2. 2-1/2 inch (64 mm) diameter hole saw
3. Spanner wrench with 3/16 inch (4.8 mm) diameter pins
