Yanmar 6LY3 series Operation Manual Download Page 87

Page: 87 / 136

PERIODIC MAINTENANCE

6LY3 Operation Manual

WARNING

EXHAUST HAZARD!

• NEVER operate the engine in

an enclosed area such as a
garage, tunnel, underground
room, manhole or ship’s hold
without proper ventilation.

• NEVER block windows, vents,

or other means of ventilation if
the engine is operating in an
enclosed area. All internal
combustion engines create
carbon monoxide gas during
operation. Accumulation of
this gas within an enclosure
could cause illness or even
death.

• Make sure that all connections

are tightened to specifications
after repair is made to the
exhaust system.

• Failure to comply could result

in death or serious injury.

0000003en

WARNING

ALCOHOL AND DRUG

HAZARD!

• NEVER operate the engine

while you are under the
influence of alcohol or drugs.

• NEVER operate the engine

when you are feeling ill.

• Failure to comply could result

in death or serious injury.

0000004en

Back

Summary of Contents for 6LY3 series









































































































































Search results

Summary of Contents for 6LY3 series

Reviews:

Related manuals for 6LY3 series

Brands by name

Popular brands

Yanmar 6LY3 series, Operation Manual

Search results

Summary of Contents for 6LY3 series

Reviews:

Related manuals for 6LY3 series

Brands by name

Popular brands