4. Disassembly and reassembly
95
(15) Mounting the oil pan spacer and the oil pan
1) Apply the liquid gasket to the surfaces of the gear
case cover, gear case flange and flywheel housing
that contact with the cylinder block.
2) Apply the liquid gasket to the spacer. Mount the
spacer to the cylinder block and tighten the bolts.
3) Apply the liquid gasket to the oil pan. Mount the oil
pan to the spacer and tighten the bolts.
4) Mount the dipstick and dipstick guide.
(16) Mounting the crankshaft pulley
1) Coat the oil seal with oil.
2) Make sure to wipe off oil on the taper surfaces of
the crankshaft and the pulley.
3) Mount the pulley insertion tool to the crankshaft
and install the pulley on the crankshaft so that the
oil seal may not be damaged.
4) Tighten the pulley to the specified torque.
(17) Mounting the engine mounting feet and turning the engine upright.
1) Mount the engine mounting feet.
2) Turn the engine upright (Oil pan is the bottom side).
(18) Mounting the flywheel
1) Coat the flywheel bolts threads with engine oil.
2) Align the positioning pins, and tighten the flywheel bolts to the specified torque.
Tightening torque
N•m (kgf•m)
V-pulley bolt
(Material : casting iron)
83.3-93.3 (8.5-9.5)
Tightening torque
N•m (kgf•m)
Flywheel bolt
80.4-86.4 (8.2-8.8)
Oil pan
Oil pan spacer
Cylinder block
Liquid gasket
977770 -01212
97
77
70
-0
12
12
Gear case cover
Crankshaft pulley
Oil seal
Pulley
insertion
tool
Crankshaft
Summary of Contents for 3YM30
Page 1: ...M9961 03E100...
