Yanmar 3JH4E, Service Manual

Page: 156 / 350

4. Disassembly and reassembly
136
4.2.4 Other material
Items Usual contents Features and application
Liquid gasket Three Bond
No.1
TB1101 200 g
(1 kg also
available) Non-drying liquid gasket; solvent less type, easy to
remove, superior in seawater resistance, applicable
to various mating surfaces.
Three Bond
No.2
TB1102 200 g
(1 kg also
available) Non-drying liquid gasket; easy to apply, superior in
water resistance and oil resistance, especially
superior in gasoline resistance.
Three Bond
No.3
TB1103 150 g Drying film, low viscosity and forming of thin film,
appropriate for mating surface of precision parts.
Three Bond
No.4
TB1104 200 g
(1 kg also
available) Semi-drying viscoelastic material, applicable to non-
flat surface having many indentations and
protrusions, superior in heat resistance, water
resistance, and oil resistance.
Three Bond
No.10
TB1211 100 g Solvent-less type silicone-base sealant, applicable to
high temperature areas. (-50 °C to 250)
Three Bond
TB1212 100 g Silicone-base, non-fluid type, thick application
possible.
Adhesive Three Bond
TB1401 200 g Prevention of loose bolts, gas leakage, and
corrosion. Torque required to loosen bolt: 10 to 20%
larger than tightening torque.
Lock tight
SUPER
TB1324 50 g Excellent adhesive strength locks bolt semi-
permanently.
Seal Tape 5 m round tape Sealing material for threaded parts of various pipes.
Ambient temperature range: -150 °C to 200 °C
O-ring kit Ø1.9 x 2 m: 1
Ø2.4 x 2 m: 1
Ø3.1 x 2 m: 1
Ø3.5 x 2 m: 1
Ø5.7 x 2 m: 1 O-ring of any size can be prepared, whenever
required.
(Including adhesive, release agent, cutter, and jig)
EP lubricant
(molybdenum
disulfate) Brand name
(LOWCOL
PASTE) 50 g For assembly of engine cylinders, pistons, metals
shafts, etc.
Spray type facilitates application work.
Brand name
(PASTE
SPRAY) 330 g
Brand name
(MOLYPASTE) 50 g Prevention of seizure of threaded parts at high
temperature.
Applicable to intake and exhaust valves. (stem,
guide, face)