Note)
1.
Do not run the starter motor for more than 10 seconds at a time.
Should the engine fail to start, wait for about 30 seconds before engaging the
starter again.
2.
Do not turn the battery switch off while the
engine is running.
3.
Be sure to check that the lub. oil pressure
warning lamp, the cooling water warning
lamp and the charging lamp go out.
4.
When the engine fails to start easily during
cold weather operations, disengage the
decompression lever and turn the starter
switch to the START position until the
engine gains momentum.
Then release the decompression lever.
Wiring Diagram
IV
9.