background image

10

Battery meter

The battery meter will show how much power the battery has.
All the indicators go on when the battery is fully charged.
The indicator lights will go off from right to left as power is consumed.
To extend battery life, do not let the indicator light go off below the power
consumption.
Note:Inordertoextendthe lifeofthebattery, pleasebesuretochargethebatteryafter
the total service hours of the machine exceed 3o minutes.

Cistern drainage

The sewage tank should be drained and cleaned after each use.
Thecleanwatertankshouldbecleanedregularlytoremoveanycorrodedareas.
Transfer the machine to the drainage location, turn off the power key, and drain according
tothe followingdischarge instructions:Forsafety: Beforeopeningor repairingthe
machine, please park the machine on the level ground, turn off the machine and take out
the key.

Discharge tank

1. Unscrew the drain pipe cover ofthe sewagetank inthe direction of reverse clock and
remove it
2. Open the cover of the sewage tank and flush the tank
3. Remove and rinse the floating filter screen in the sewage tank.

Battery charging

Note:Inordertoextendbatterylifeandensureoptimalperformanceofthemachine,

the battery must be charged at least 30 minutes after the machine is in use.

Do not leave the battery uncharged for a long time.
The following charging instructions apply to the charger attached to the machine.
Be sure to use the following chargers to avoid battery damage.
Battery charger Specifications:
● Charger type: charger for lead-acid battery
● The output voltage is 24 volts
● Output current 1 15 amperes
● Automatic power off circuit
● It is suitable for deep circulating battery charging
1. Move the machine to a well-ventilated place for charging.
Warning: Fire or explosion danger.
The battery emits hydrogen gas.

Summary of Contents for YZ-X8



















Reviews: