YZ-X2
7
2.1.2 Charging the battery
2.1.3 Adding water to the water tank
●Open the cover of the water tank before using the machine, pour
clean water into the water tank, pay attention to the water quality,
and prevent the waterway from being blocked.
●When the machine is used to clean the epoxy floor, it is necessary
to replace the ordinary brush plate with the needle plate and add a
cleaning pad for cleaning, which can effectively protect the ground
●
The charging socket cable requires at least
a power cable with a diameter of 4mm.
●
Note: The charger is placed on a stable
platform, pay attention to moisture-proof,
anti-moisture Water and drop resistant.
●
The charging time must be guaranteed for
6-10 hours
per charge. Guaranteed electricity
The battery is fully charged during operation.
●
During the transportation of the charger,
please do not carry the power cord by hand to avoid
Loose wiring connector.
