YANGZI X4, Operating Instruction

Page: 8 / 17

X4
3
●By pulling the handle, put down the squeegee head;
●Open the water valve;
●Turn on the main power switch, start the brush plate switch button and the water
absorption motor switch button;
●Hold the handle tightly and keep driving at a constant speed. (Ordinary
paragraph)
●Turn on the speed control switch (note: the speed should not be too fast when
cleaning), lightly press the travel switch to keep the machine running smoothly.
(Self-propelled)
Stop of the machine
● Loosen the travel lever first; (this step is only for self-propelled drive models)
●Close the brush switch button;
●Close the drain valve;
●Close the switch button of the water suction motor;
●Turn off the main power switch;
● Lightly step on the foot lever to lift the scrubber;
●By pulling the handle, lift the squeegee head.
2.3 Precautions for machine operation
●Avoid stopping the machine for a long time in the same place and let the brush
clean; this will leave unnecessary marks on the ground.
●When cleaning the floor is epoxy floor, it is necessary to add a cleaning pad to
avoid the abrasion of the epoxy floor by the brush.
●The machine is filled with clean water, and attention should be paid to the clean
water, so as not to block the water discharge valve with impurities.
●After the machine works for a period of time, it is necessary to discharge the
sewage from the sewage tank in time to prevent the sewage from immersing in the
suction motor and causing it to burn.
●To clean the ground with serious oil pollution, please put an appropriate amount
of detergent in the clean water tank to achieve better cleaning effect, and at the same
time drop an appropriate amount of defoamer into the sewage tank to prevent the
sewage tank foam from immersing in the suction motor and causing burning.
●After each work is completed, please flush the sewage tank in time to keep the
machine well maintained.
●After the operation in winter, please drain the clean water tank in time to avoid
freezing and affect the reuse.
Sewage tank discharge sewage
●Turn off the main power to make sure the machine stops;
●Open the cover of the sewage pipe and discharge the water;
●The sewage tank can be properly rinsed with clean water.