Yamato WA500, Instruction Manual

Page: 27 / 51

-24-
Identification of Parts
Operation panel
TROUBLE
⑦
Trouble Indication lamp
…
The lamp blinks when detects abnormality in operation or trouble of the unit. The indicator
(1) identifies such a situation.
DISTILLED
WATER(L)
⑧
Distilled Water Level indicator
…
The indication lamps show 5 levels of the distilled water in the tank. When the water
storage is less than 8L, the lowest yellow lamp is lit. In this case, you can not take distilled
or ion-exchanged water for preventing the empty pump operation. When the lowest lamp
start blinking, you can take distilled or ion-exchanged water again.
DISTILLED
WATER(L)
DISTILLED
WATER(L)
DISTILLED
WATER(L)
DISTILLED
WATER(L)
DISTILLED
WATER(L)
DISTILLED
WATER(L)
CON .
FIX
⑨
Switch to change methods to collect pure water
…
This is the switch to select taking water repeatedly or by the fixed volume. To select taking
the fixed amount, push once. If you push again, you can take water repeatedly.
CON.
FIX
Lamp ⑩
Lamp to identify the water-collection method
…
This lamp is lit only while you select the repeated collection. On the other hand, the lamp
foes out when you select collection of the fixed volume.
⑪
Switch to collect ion-exchanged water
…
1) In case of repeated collection
Switch ON (one push) to collect ion-exchanged water.
Switch OFF (one more push) to stop collection.
2) In case of collecting the fixed volume
Switch ON (one push) to start collection of ion-exchanged water. The unit stops
automatically its operation when the collection reaches the set amount. If you push the
switch during collection, the unit would stop operation even before the collection
reaches the set amount.
⑫
Lamp to indicate collection of ion-exchanged water
…
The green lamp is lit during collection of ion-exchanged water.
DISTIL
LED
WATER
⑬
Switch to take distilled water
…
1) Incase of repeated collection
Switch ON (one push) to collect distilled water.
Switch OFF (one more push) to stop collection.
2) Incase of collecting the fixed volume
Switch ON (one push) to start collection of distilled water. The unit stops its operation
automatically when the collection reaches the set amount. If you push the switch during
collection, the operation would stop even before the collection reaches the set amount.
＜
No water
＞
＜
Full water
＞
Operational range of the pump to take water