![background image](http://html1.mh-extra.com/html/yamato/ve2700-8-class/ve2700-8-class_instruction-manual_4656428046.webp)
36
VE2700-8
6. Adjustments
①
②
③
⑩
⑨
⑦
⑧
④
⑤
⑥
6.15 Pressure of the clutch tension spring (
VE2740PR-8F
)
6.14 Feeding amount of the puller (VE2740PR-8F)
Fig. 6-41
Fig. 6-42
Fig. 6-43
(1) Remove the top cover seal plug ①.
(2) Turn the handwheel until the screw ② of the upper
feed roller regulator comes to the right above.
Loosen the screw ② with a hexagon socket screw
-
driver.
(3) Turn the handwheel until the adjusting screw ③ comes
to the right above. (Fig. 6-41)
(4) Turn the adjusting screw ③ to adjust the feeding
amount.
(5) Tighten the screw ② securely with a tightening torque
of 2.5 N・m.
● To decrease the amount, turn it clockwise.
● To increase the amount, turn it counterclockwise.
(1) Loosen the two screws ⑧ to tighten the collar ⑦
slightly.
(2) Turn the adjusting screw ⑨ to adjust the pressure of
the clutch tension spring ⑩.
Adjust the pressure so that the spring ⑩ can be
turned by pushing with a finger.
(3) Tighten the two screws ⑧ securely.
● To increase the pressure, turn it clockwise.
● To decrease the pressure, turn it counterclockwise.
To make fine adjustment, loosen the nut ⑥ of the upper
feed roller lever rod ⑤ for the upper feed roller lever ④.
And move the screw ⑥ up or down to adjust it.
● To decrease the amount, raise it.
● To increase the amount, lower it.
Decrease
Increase
Decrease
Increase
Decrease
Increase