13
VE2700-8
5. Proper operation
5.3 Threading
A, B, C: Needle thread
Pull out the threads until they come to the front of the
needles. Then, cut off the knots before passing them
through the needle eyes.
Thread the needles correctly so that the left needle
thread
A
is at the inmost position as shown in the fig
-
ure.
E: Looper thread
Pull the thread until the knot comes out. Then, cut off the knot.
D: Top cover thread
Pull the thread until the knot comes out. Then, cut off the knot.
Fig. 5-4
Without UT, UT-A device
When not threaded, thread correctly as shown in Fig. 5-4.
When had been threaded, knot the preset thread and new
one together to rethread.
☆ For stretchable thread
A B
C
D
E
For stretchable thread
Before performing this work, ALWAYS
turn the power switch OFF and check
that the motor has already stopped.
ÃÁÕÔÉÏÎ