The temperature control is manually adjustable to the desired temperature in 1°
C increments within the limits of the control range.
TEMPERATURE SET POINT
The control has two displays, the upper display is the actual chamber
temperature and the lower display is the temperature set point. The
temperature set point has been pre-set at the factory.
CHANGING TEMPERATURE SETPOINT
The temperature set point can be changed by simply pressing the “up” arrow to
raise or the “down” arrow to lower the temperature set point.
WARNING
CHANGING THE CONTROL PARAMETERS OUTSIDE OF
THE MANUFACTURE RECOMMENDED RANGE, COULD
SHORTEN THE LIFE-SPAN OF YOUR EQUIPMENT; OR
CAUSE ISSUES RESULTING IN MECHANICAL FAILURE.
WARNING
USE ONLY THE “UP” AND “DOWN” KEYS WHEN MAKING
CHANGES ON THIS CONTROL. WARRANTY WILL BE VOID
IF USED IN ANY OTHER WAY.
CONTACT FACTORY FOR ALL OTHER ADJUSTMENTS IN
SETTINGS.
7
FDC 4000 CONTROL
TEMPERATURE CONTROL
TEMP
SET
-888
-888
Summary of Contents for ULF001C
Page 15: ...13 WIRING DIAGRAM...
Page 16: ...14 ALARM WIRING DIAGRAM...
Page 17: ...15 REFRIGERATION FLOW CHART...