Yamato Pure Line Series, Manual

Page: 41 / 46

38
10.Specifications
Type WL200 WL220
P
erfor
m
an
c
e
※
1
Sampling method Ion exchange
Feed water type One-touch coupler water supply connection resin hose
Sampled pure water JIS K 0557 A3 deionized water
Sampling rate and
method
※
2
About 1L/min deionized water, taken continuously
C
om
pos
iti
o
n
Ion exchange resin
cartridge
2L ion exchange resin
containing activated carbon
(CPC-P) 1 piece
2L ion exchange resin containing
activated carbon (CPC-P) 1 piece
2L ion exchange resin (CPC-E)
1
piece
Final filtration
0.1
μ
m membrane filter
Leak detection Feed water electromagnetic valve forced to close on detecting leakage
S
tan
dard
Raw water pressure
range
0.5
～
5
×
100kPa
（
0.5
～
5kgf/
㎝
2
）
Safety devices
Circuit breaker, leak sensor, reducing valve, alarm of abnormal water
quality
Power supply
（
50/60Hz
）※
3
Single phase AC100
～
240V 0.05
～
0.2A
Overall dimensions
※
4
（
Width
×
Depth
×
Height
）
350mm
×
350mm
×
450
㎜
Sampling port 230mm above floor
Mass About 14
㎏（
in dry state
）
About 16kg(in dry state)
Ma
rk
ing
Water quality display LED display (conductivity/resistivity)
Other displays
Display for timing of consumables (CPC-P and CPC-E
：
to be replaced
simultaneously to prevent degradation of water quality)
Membrane filter, alarm display (water leakage alarm)
Accessories
Feed water hose set
Power cord
Instruction manual
Guaranty card
Ion exchange resin (CPC-P)
Ion exchange resin (CPC-E)
Seal tape
Membrane filter 1 piece
1 piece
This manual
1 piece
1 piece
1 piece (WL220 only)
1 piece
1 piece
Consumables
Name of part Type Article No.
Ion exchange resin cartridge (for
WL200)
CPC-P 253254
Ion exchange resin cartridge
(WL220
、
WL200 optional CPC-E
connection set (for OWL36)
※
5
CPC-P + CPC-E 253262
Membrane filter (two pieces
enclosed)
MFRL727 9020010004
※
1 The performance applies to the conditions with power supply of AC100
～
240V, room
temperature of 23
℃±
5
℃
, and humidity of 65
％
RH
±
20
％
.
The ambient temperature of this unit ranges from 5
℃
to 35
℃
. For the raw water temperature,
the guideline must be set to 10
℃～
35
℃
.
※
2 With the raw water of 1.0
×
100kPa (1kgf/cm
2
) or less, the sampling rate becomes 1.0L/min or
less.
※
3 The 100V power cord (with 3P plug attached) is provided.
※
4 No projection included
※
5 CPC-E and CPC-P are marketed as a set and not sold separately and individually.