8
2. Before operating the unit
Precautions when installing the unit
8. Handling of a power cord
●
Never use electrical power cords bundled. When these are used bundled, they might
overheat causing a fire.
●
Do not convert, forcibly bend, twist or pull the power cord. Otherwise, a fire or an electrical
shock may result.
●
Do not place the power cord under a desk or a chair, or sand between objects to avoid it
from being damaged.
Otherwise, a fire or an electrical shock may result.
●
Do not place the power cord under a desk or a chair, or sand between objects to avoid it
from being damaged.
●
Otherwise, a fire or an electrical shock may result.
●
Do not place the power cord close to a stove or other heat generating device. Sheath of
the cord may burn and result in a fire or an electrical shock.
●
If the power cord should be damaged (exposure of core wire or disconnection),
immediately turn the power supply in the right side of the main body off, disconnect the
power plug and ask your dealer to replace the cord. If the unit is operated with a
damaged power cord, a fire or an electrical shock may result.
●
Connect the power cord to an appropriate wall outlet or distribution board.
9. Be sure to keep the raw water pressure from water supply within the specified
range.
●
Use the supply water pressure within a range of 0.5
～
5
×
100kPa
（
0.5
～
5kgf/cm
2
）
24
hours a day.
Note that the water sampling range becomes 1.0 L/min or less at the raw water pressure
of 1.0
×
100kPa
（
1kgf/cm
2
）
or less.
●
The raw water pressure range is the same even when the optional water inlet unit(see
) is used.
Summary of Contents for Pure Line Series
Page 2: ......
