YCO-1126-01-08
PPC-300 & PPC-300D Technical Manual
User Mode
With the scale on and in the normal display mode, press
+
to enter
user mode.
Press the
key to cycle through the user parameters.
Press the
key for about three seconds to turn the scale off and exit
user mode.
System Mode
Enter test mode (see Section III Calibration - Enter Test Mode.)
With the display showing initial counts, press
+
to enter system
mode.
Press the
key to cycle through the user parameters.
Press
+
a second time to return to test mode, or press the
key
for about three seconds to turn the scale off and exit system and test
modes.
Factory Mode
Enter test mode (see Section III Calibration - Enter Test Mode.)
With the display showing initial counts, press
+
to enter calibration
mode, then press
+
to enter factory mode.
Press the
key to cycle through the user parameters.
Press
+
to return to test mode, or press the
key for about three
seconds to turn the scale off, and exit factory and test modes.
IV Setup
10
Note:
Two key icons joined by a plus sign (
+
) means to press and hold the first key, press the
second key, and then release both keys.
