YCO-1081-07-01
Optional Analog Meter
Calibrating Meter
1) Press and hold
key 2-3 seconds. Display will read “
ADJ
” for adjust.
2) Use the
and
key to move the indicator to the bottom of the Under range.
3) Press the
key. Indicator will move to the Over range.
4) Use the
and
key to move the indicator to the top of the Over range.
5) Press the
key to lock in calibration and to return to weighing mode.
Setting Analog Meter
1) Press and hold the
key for 2-3 seconds. Display will change.
2) Press the
key to select the digit you want to set. Underscore will move to the right.
3) Press the
and
keys to set the desired value.
4) Repeat steps 2 and 3 until the entire number is set.
5) Press the
key to set the Lower limit and move to the Upper limit.
6) Press the
key to select the digit you want to set.
7) Press the
and
keys to set the desired value.
8) Repeat steps 6 and 7 until the entire number is set.
9) Press the
key to set the Upper limit and return to the weighing mode.
This sets Memory A. To set B and C, start by holding the corresponding key in step 1.
Batching
With no load on the scale and the CENTER ZERO and STABLE indicators lit, place an empty container
on the scale and press the
key. The weight of the empty container will be deducted automatically
and the display will
read zero. Place the first item in the container until the desired weight is reached.
Press the
key. The display will
return to zero and the TARE indicator will
light. Place the second
item in the container until the desired weight is reached. Press the
key again. Repeat the steps
with any additional items. When the weighing of all items is complete, remove everything from the
platform and press the
key. The display will
return to zero and the CENTER ZERO and STABLE
indicators will
light. Remember that you can only tare off items up to the capacity of the scale.
Operation Manual
PPC-101
4
