YCO-1081-07-01
Setting Over/Under Indicator
1) Press and hold the
key and push the
key. (Yellow Corners)
2) Press the
key to select the digit you want to change. The underscore will advance to the right.
3) Press the up and down arrows to select the desired value.
4) Repeat steps 2 and 3 until all digits are set.
5) Press and hold the
key and push the
key (Yellow Corners). This sets the lower limit and
moves to upper limit.
6) Press the
key to select the digit you want to change.
7) Press the up and down arrows to select the desired value.
8) Repeat steps 6 and 7 until all digits are set.
9) Press and hold the
key and push the
key (Yellow Corners). This sets the upper limit and
returns you to weighing mode.
** See page 8 for optional Analog Meter operation.
Weighing
GROSS Weighing
With no load on the scale, the display reading zero, and the CENTER ZERO and STABLE indicators lit,
place the item(s) to be weighed on the scale.
The weight displayed will
be GROSS weight.
NET Weighing (with Semi-Automatic Tare)
With no load on the scale and the CENTER ZERO and STABLE indicators lit, place an empty container
on the scale and press the
key. The weight of the empty container will be deducted automatically
and the display will read zero.
Place the item(s) to be weighed in the container. The NET WEIGHT Indicator will light and the weight
displayed will be the NET weight. To display the GROSS weight, press the
key. The GROSS
WEIGHT Indicator will light and the weight displayed will be the GROSS weight. Press the
key
again to return to the NET weight. To return to GROSS weighing mode, remove all items from the scale
and press the
key.
PPC-101
Operation Manual
3
