YCO-1052-03-00
PB-200
Technical Manual
6. Toggle be tween on and off to enable or disable the selected unit
mode by pressing the
key.
7. When the desired state is displayed, press the
key to return
to the unit mode selection display.
8. Continue to advance through the unit modes by pressing the
key until all desired changes have been made.
9. Press the
key until the display reads “Unit”.
10. Press the
key once to proceed to automatic-off setting (see
sec tion II.A.2 for details.)
11. To return to normal operating mode and save any changes, press
the
key twice. The display will read “End”. Press the
key.
12. To exit the system parameter mode without saving any changes,
press the
key.
II Set-up Procedures
2
II.A System Parameter Mode
II.A.1 Unit Enable\Disable (continued)
