24
4. Operating procedures
Program operation
Operation is performed as programmed in this mode as shown in the diagram below.
Setting the program operation
1 Turning power on
Turn the ELB at the upper right side of the unit
“On”.
Keeping the key pressed longer will turn power
on.
Main display shows the internal temperature and the
Sub display shows the set temperature.
*
Register a program prior to starting a program operation.
2 Registering a program
You can set up to 99 steps for a program and can save
up to 99 program patterns.
(
The maximum number of steps that can be saved is
99, which means you can save 10 patterns of programs
when each pattern uses nine steps.
)
※
Note that you cannot use cross-repeating or setting of
multiple destinations for return when you use the
program repeat function.
Press the key, display [PRoG] in the Sub display
and then press the key.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Program start
Program end
(Time)
Start pv
Set temp.
(Temp)