27
4. Operation Method
Auto Stop Operation
In this mode, the unit automatically comes to a stop after the set period passes away from the start of
fixed-value operation according to timer setting, as shown in the figure below.
温度（℃）
時間（t ）
SV :温度設定値
PV :温度表示値
SV
ｽ ﾀｰﾄ /ｽ ﾄ ｯﾌ ﾟ ｷ ｰON
ｽ ﾀｰﾄ /ｽ ﾄ ｯﾌ ﾟ ｷ ｰOF F
ﾀｲ ﾏ起動
ﾀｲ ﾏｽ ﾀｰﾄ
ﾀｲ ﾑ ｱｯﾌ ﾟ
PV
Auto stop operation procedure
1. Set stop time
①
In the initial screen, press the TIMER key, select
characters AStP
that indicate the auto stop
operation with the TIMER key in the set temperature
screen to make them flash.
②
Press the ENTER key.
The measurement temperature screen displays the
character
"SV"
,
which
indicates
the
temperature setting. The setting temperature screen
displays the current setting temperature with blinking.
The AUTO STOP lamp blinks, too.
③
Set the temperature using the "
▼▲
".
The temperature can be set to the first decimal place.
④
Press the ENTER key again.
The measurement temperature display screen displays
the character "tim"
, which indicates the timer
setting. The setting temperature display screen
displays the current setting time with blinking.
⑤
Set the
time using the "▼▲".
ALARM
AUTO STOP
AUTO START
FIXED TEMP.
ENTER
FIXED
TEMP.
TIMER
SUB
MENU
RUN
STOP
HEATER
SET TEMP.
OVER TEMP.
PROTECTOR
ALARM
AUTO STOP
AUTO START
FIXED TEMP.
ENTER
FIXED
TEMP.
TIMER
SUB
MENU
RUN
STOP
HEATER
SET TEMP.
OVER TEMP.
PROTECTOR
ALARM
AUTO STOP
AUTO START
FIXED TEMP.
ENTER
FIXED
TEMP.
TIMER
SUB
MENU
RUN
STOP
HEATER
SET TEMP.
OVER TEMP.
PROTECTOR
①
②
③
④
TEMP
RUN/STOP key: ON
RUN/STOP key: OFF
TIME (t)
SV: Set Temp.
Timer starts
Time-up
Timer Operation
⑤
