15
3. Names and functions of parts
Explanation of characters
Characters on the controller are explained in this section.
Characters Identifier Name
Application
AStP
Auto stop setting
Used for setting auto stop operation.
AStr
Auto start setting
Used for setting auto start operation.
End Time
up
Displayed when timer operation has
ended.
See pages 20 and 22.
cAL
Calibration offset setting
Used for inputting a calibration offset
temperature
See section “Using the calibration
offset function” on page 26.
Lock
Key lock of settings
Key locks settings to prevent their
alteration
See section “Using the lock function”
on page 28.
Pon
Power outage compen-
sation setting
Selects operations after recovery from
power outage.
See section “Using the power outage
compensation function” on page 29.
*See the section “Operation mode
・
function setting keys and characters” on page 18 for characters
of operation modes and functions.
