30
Handling Precautions
WARNING!
If a problem occurs
If smoke or strange odor should come out of this unit for some reason, turn off the power key
right away, and then turn off the circuit breaker and the main power. Immediately contact a
service technician for inspection. If this procedure is not followed, fire or electrical shock may
result. Never perform repair work yourself, since it is dangerous and not recommended.
Substances that cannot be used
Never use explosive substances, flammable substances and substances that include explosive
or flammable ingredients in this unit. Explosion or fire may occur. (Refer to page45 "List of
Dangerous Substances".)
CAUTION!
Do not step on this unit
Do not step on this unit. It will cause injury if this unit fall down or break.
Do not put anything on this unit
Do not put anything on this unit. It will cause injury if fall.
Prevention of burn
After an operation, the oven unit and the inside of door, samples have a high temperature for a
while. For prevent a burn, be careful that do not touch to the parts in the above when handling
samples.
During a thunder storm
During a thunderstorm, turn off
the power key immediately, then turn off the circuit breaker and
the main power. If this procedure is not followed, fire or electrical shock may be caused.
About the amount of samples
If the excessive amount of sample is set, it could be impossible to control the temperature
normally. To keep the temperature control accuracy, do not use this unit in overload.
Return after power failure
When power is supplied after a power failure, the device automatically starts operation again with
the same state as just before the power failure. It is danger that the device starts unattached
operation after a power failure. We recommend for you to turn off the switch of this unit if a
power failure occurs during operation.
In-oven temperature
This unit uses a cooling fan to prevent an over temperature of its outer surface during operation
when the earth leakage breaker is turned ON. Do not turn OFF the interrupter, or do not
disconnect the power supply plug directly when the in-oven temperature is 600
℃
or more after
operation, except in the case of emergency.
Provide ventilation at the first operation
This unit exhausts smoke and smell due to burning of organic matters in the furnace when it is
used for the first time. This is not abnormal, but ventilating inside the room should be done.