Yamato DKS-3002 Operation Manual Download Page 4

DKS-3002                       Operation Manual

DKS-3002                       Operation Manual

INSTRUCTIONS FOR USE

MINUS READINGS

"----" indicates a minus reading of less than 1 lb or 999 g.  For

example, if the scale is set to zero with a bowl on the plat-
form that wieghs 1 lb 4.0 oz and then the bowl is removed,
the display will show "----".  To reset to zero, either place the
bowl back on the scale or press the ON/ZERO key.

TO SWITCH OFF

Press the OFF button once to switch off.  Switching your scale

off immediately after use will increase the battery life.  An
automatic off will operate after the display has been showing
zero continuously for 30 seconds, or after a stable weight
reading has been displayed continuously for two minutes.

INSTRUCTIONS FOR USE

USING A BOWL

This scale may be used with any bowl or container, but the

combined weight of the bowl and the substance being
weighed must not exceed the full capacity, 4 lb or 2 kg, of the
scale.  Place the bowl on the platform then press the ON/
ZERO key.  The scale will display "0.0" or "0", and be ready
to weigh.

4

5

Summary of Contents for DKS-3002

Page 1: ...ON 1775 S Murray Blvd Colorado Springs CO 80916 USA Tel 719 591 1500 Fax 719 591 1045 YAMATO TECH CORPORATION 112 19425LangleyBy Pass Surrey B C V3S 6K1 Canada Tel 604 533 2338 Fax 604 533 0827 www YamatoCorp com NOTES YCO 1039 02 02 8 WEIGHT 4 lb x 0 1 oz 0 1000 g x 1 g 1000 2000 g x 2 g lb g lb oz ...

Page 2: ... dead batteries immediately Clean the scale with a damp cloth do not immerse the scale in water or use chemical or abrasive cleaning agents All plastic parts should be cleaned immediately after contact with fats spices vinegar or strongly flavored or colored foods Avoid contact with acids such as citrus fruit juices Avoid placing your scale directly next to a microwave oven if both will be used at...

Page 3: ...the scale platform exceeds 105 of the capacity of the scale Err will appear on the digital display Reduce the load 4 Is movement of the scale platform restricted in any way Make sure that no foreign objects are wedged between the platform and the scale body Verify that the platform is not rubbing against any surrounding objects 5 Lo indication Remove the battery cover and install a new 9 volt alka...

Page 4: ...once to switch off Switching your scale off immediately after use will increase the battery life An automatic off will operate after the display has been showing zero continuously for 30 seconds or after a stable weight reading has been displayed continuously for two minutes INSTRUCTIONS FOR USE USING A BOWL This scale may be used with any bowl or container but the combined weight of the bowl and ...

Reviews: