DKS-3002 Operation Manual
DKS-3002 Operation Manual
INSTRUCTIONS FOR USE
POWER
The DKS-3002 can be powered by a 9 volt alkaline transistor
battery or by an optional AC adaptor. Plug the AC adaptor
into a wall outlet and insert the plug into the jack in the back
of the scale, or remove the cover on the underside of the
scale and push the connector firmly onto the battery termi-
nals. Replace the cover.
TO SWITCH ON
Place the scale on a flat, stable surface. Press the ON/ZERO
key once (quite firmly) in the center. The display will show
"8888" and then "0.0".
CLEANING AND CARE
• If the scale is not being used for a long period of time, re-
move the battery. Remove dead batteries immediately.
• Clean the scale with a damp cloth, do not immerse the scale
in water, or use chemical or abrasive cleaning agents.
• All plastic parts should be cleaned immediately after contact
with fats, spices, vinegar, or strongly flavored or colored
foods. Avoid contact with acids such as citrus fruit juices.
• Avoid placing your scale directly next to a microwave oven if
both will be used at the same time. Some microwave ovens
emit interference which, at close range, can cause the dis-
play of the scale to fluctuate.
TECHNICAL SPECIFICATIONS
Power Supply:
One alkaline 9 V battery or an optional AC adaptor
Capacities and Divisions
0 lb to 4 lb x 0.1 oz
0 g to 1 kg x 1 g and 1 kg to 2 kg x 2 g
Accuracy:
To /- one increment or 1% of applied load
Maximum Tare:
15.9 oz or 999 g
Dimensions:
Scale - 6 5/8" x 5 7/8" x 1 1/2"
Platform - 4 3/4" x 5 7/8"
2
7
