Yamato DF411, Instruction Manual

Page: 33 / 72

30
・
During Soak operation, segment number and rest time of Soak time are displayed
alternately. However in case of waiting the blinking message “Waiting” is shown.
Setup Temp
１００℃↑
Segment
Ｐ０１－０１
（
Segment number during the practice
）
↓
Setup Temp
１００℃↑
Setup Temp
１００℃↑
Soak , after
３０ｍｉｎ
Waiting 1
ｍｉｎ
（
The rest time of the Soak time
） （
A case during the wait
）
・
While segment of repeat section is being carried out, segment number and the rest
number of repeat times are displayed alternately.
Setup Temp
１００℃↑
Rep. rest
１０
（
The rest number of times of the repeat
）
・
When program operation ends, “End lamp” blinks and sub display indicates the time
when the operation ends.
OP.stop time
1999-09-17 15:00
STANDBY
END
HEATER
FAN
FIXED TEMP
AUTO START
AUTO STOP
PROGRAM
・
When you choose “Off” in setting fan-spinning speed of program segment, fan will stop at
the same time that operation ends.
5. How to stop
・
If you want to suspend the state of operation standby or stop program operation halfway,
press “Power key”.
POWER