Yamato DF411, Instruction Manual

Page: 21 / 72

18
POWER ON/OFF
Turn on of circuit breaker.
・
When power supply is off, present date and time are shown on sub display
※
Clock is not set correctly when it is forwarded from factory. Refer to page51 for
handling and adjust date and time accordingly
Push the power key
1999-09-17 12:00
FIXED TEMP
AUTO START
AUTO STOP
PROGRAM
POWER
MODE PROGURAM NU
・
After short sound of beep, power supply is turned on.
Standing by
1999-09-17 12:01
℃
STANDBY
END
HEATER
FAN
FIXED TEMP
AUTO START
AUTO STOP
PROGRAM.
・
After power supply is turned on, fan starts to spin and “fan lamp” flashes. Main display
indicates temperature of the inside of tank and “
℃
lamp” flashes. Sub display
indicates “standing by” and “standing by lamp” flashes. This is “On standby” state.
・
A power supply breaks off with when a key is pushed again.
・
When you press “Power supply key” again, the power will be turned off. In case of first
use, power supply of the equipment is still off. If you turn off short circuit breaker
while using or main power supply is shut out because of power failure, it will be
restored to the condition which main power supply is yet to be shut out. This is
“Instantaneous suspension recovery function”.