Yamato BM510, Instruction Manual

Page: 8 / 45

5
2. PRE-OPERATION PROCEDURES
Installation Precautions & Preparations
WARNING!
1. Ground wire MUST be connected properly.

Ground wire must be connected to a proper grounding line or teminal in order to prevent
electric shock.

Never connect ground wire to gas lines or water pipes.

Never connect ground wire to telephone grounding lines or to lightning conductor rods. Fire
or electrical shock may result.

Never insert multiple plugs into a single outlet. Doing so may result in power cable
overheating, fire or drop in voltage

Use an outlet with a dedicated ground terminal for the larger capacity single-phase 100V to
120V BM500 and B0400 models.

Use an outlet with a dedicated ground terminal for the single-phase 200V to 240V BM510
and B0410 models.
2. Choose an appropriate installation site.

DO NOT install unit:

where flammable or corrosive gases/fumes will be generated.

where ambient temperature will exceed 35ºC, will fall below 5ºC or will fluctuate.

in excessively humid or dusty locations.

where there is constant vibration.

where power supply is erratic.

in direct sunlight or outdoors.

where there is no exhaust/ventilation hood.

Install BM/BO series unit in a location with sufficient space, as specified as below.
More than
10cm
More than
10cm
More than 10cm
More than 10cm
Main Unit