36
AZ8600SD
7.
SC10 device
7.1 Outline
7.2 Adjusting ventilating amount
SC10 is a self-cleaning system that can keep a
clean and comfortable environment for operators.
It eliminates clogged dust around the lower knife
holder and under the stitch plate by cutting ma-
terial during the sewing. And also makes mainte-
nance easily and prevents troubles caused by the
lint.
Select the type of setting by changing the posi-
tion of the air deflector ① depending on the sew
-
ing speed and sewing condition.
To set the standard position, insert the air de-
flector ① into the guides ② and ③ . (See Fig.
7-2)
For high speed and less dust during sewing, in-
sert the air deflector ① into the guides ② and ④ .
(See Fig. 7-3)
When not using SC10 device, remove the air deflec
-
tor ① .
Fig. 7-1
Fig. 7-2
standard setting
①
③
②
④
②
Fig. 7-3
to lint
collecting device
air flow