7
The figure below indicates how to fasten and loosen an insert tool. Before using this tool,
one should make sure that the insert tool is fixed in the collect very tightly.
One should also get a habit of checking the weariness of the insert tool in order to increase
the efficiency and safety.
•
On-off device
To operate the tool, just push the lever toward the tool itself. The tool continuously
reciprocates as one push the lever down and it stops running released.
For the sake of safety, put it on hanger or on a soft flat pad when not in use.
•
When changing grinding stones, always disconnect air supply to avoid injury.
•
When job is completed, turn off the air compressor and store the air tool after lubrication.
Please see at your local governal disposal for waste regulation
SPECIFICATIONS
COD. 99454
–
(RP7314)
Free Speed @90 PSI
22,000 RPM
Maximum Working Pressure 90 PSI
Air Inlet
1/4”
Recommended Hose Size
3/8”
Collet Size 3mm or 6mm
Average Air consumption 128,3 l/min
Weight
0.58 Kg
Lenght
173 mm
A weighted sound pressure level 83 dB(A)
Sound power level 94 dB(A)
Vibration in the handle 2.06 m/s2
COD. 99455
– kit 14 pcs –
(RP7814)
Free Speed @90 PSI
22,000 RPM
Maximum Working Pressure 90 PSI
Air Inlet
1/4”
Recommended Hose Size 3/8”
Collet Size 3mm or 6mm
Average Air consumption 128,3 l/min
Weight
1,4 kg
Lenght
173 mm