3
AB-5961
Specifications
Item Specifications
Temp.
-20 to 60 °C
Measurement range
Humid.
0 to 100 % RH (-5 to 55 °C)
Temp. 100
Ω
/ 0 °C
Ouput signal
Humid.
1-5 V DC (linear to 0 to 100 % RH) (output impedance: min. 10 k
Ω
)
0-10 V DC (linear to 0 to 100 % RH) (output impedance: min. 10 k
Ω
)
4-20 mA DC (linear to 0 to 100 % RH) (maximum permissible load 300
Ω
)
Temp.
+/- 0.3 °C (at conditions of -20 to 60 °C)
Sensing accuracy
Humid.
+/- 3 % RH (at conditions of 30 to 70 % RH 25 °C)
+/- 5 % RH (at conditions of 20 to 80 % RH 15 to 35 °C)
Temp.
TY series
max. 1 min.
HTY, HY series
max. 4 min.
Time constant
(at air velocity 2 m/s)
Humid.
Max. 1 min
Temp.
Rated operating conditions:
-20 to 60 °C
0 to 100 % RH (non-condensing)
Extreme operating conditions: -20 to 60 °C
0 to 100 % RH (non-condensing)
Storage conditions:
-30 to 70 °C
5 to 95 % RH (non-condensing)
Humid.
Rated operating condtions:
-5 to 55 °C
10 to 100 % RH (non-condensing)
Extreme operating condtions: -20 to 60 °C
0 to 100 % RH (non-condensing)
Storage conditions:
-30 to 70 °C
5 to 95 % RH (non-condensing)
Environmental
conditions
Air velocity Extreme operating conditions: 0 to 15 m/s
Power supply
24 V AC +10/-15 % (50/60 Hz), 24 V DC +/- 10 % (only for HTY
、
HYseries)
Power consumption
0.2 VA
(at conditions of 24 V AC
、
HTY, HY series 1-5 V, 0-10 V output model)
150 mW
(at conditions of 24 V DC
、
HTY, HY series 1-5 V, 0-10 V output model)
1.0 VA
(at conditions of 24 V AC
、
HTY, HY series 4-20 mA output model)
800 mW
(at conditions of 24 V DC
、
HTY, HY series 4-20 mA output model)
Dielectric strength
500 V AC less than 1 mA of leak for 1 minute
Insulation resistance
500 V DC min. 20 M
Ω
Vibration resistance
9.8 m/s² (10 to 150 Hz)
Protection
Housing IP54 (when splash-proof connectors and designated multi-core cables are used or when a
designated conduit is used)
The head of TY series is IP24
Installation
Duct, air chamber, ventilated case for meteological instruments (with special bracket)
Wiring
Terminal block connection
Material
Housing:
GF20 % Polycarbonate mixed resin, gray (equivalent to DIC-651)
Filter cap:
Denatured PPE resin, gray (equivalent to DIC-651)
Weight
Approx. 240 g (7803 series) Approx. 210 g (7813 series)
Accessories None
Order separatly
83157235-001
Mounting bracket
83157240-004
Conduit mounting set (for HTY, HY series
、
applicable cable outer diameter 11 to 14
φ
)
83157240-009
Conduit mounting set (for TY series
、
applicable cable outer diameter 9.4 to 11
φ
)
83104098-004
Seal connector (for HTY, HY series
、
applicable cable outer diameter 10.5 to 14.5
φ
)
83104098-003
Seal connector (for TY series
、
applicable cable outer diameter 8.5 to 12.5
φ
)
DY8000A1001
Sensor shield for outdoor
DY3002A1005
Ventilated case mounting bracket (L shape metal)
Order separately for
maintenance
83162945-003 Filter
set
HTY78*3/HY78*3 series have passed the following tests:
EN50081-1/1992 (EN55011/1998 group 1, class B)
EN50082-1/1997 (EN61000-4-2, EN61000-4-3, ENV50204, EN61000-4-4, EN61000-4-5, EN61000-4-6,
EN61000-4-11)
