Yamarin 79 Day Cruiser
24 (53)
1. Engine main switch
5. Bow propeller fuse
2. Supply current main switch
6. Stern anchor winch (optional accessory)
3. Direct supply*
fuse
4. Fuse panel
*Engaged when the red indicator is visible.
Electric circuit fuses are located next to the main power switch and steering console. Fuse
sizes are also presented in the electrical diagram. Do not change the circuit breaker
amperages or install any components that exceed the nominal amperage of the circuit in the
electric system.
Remember to always use both main switches when switching the power off or on.
Remember also to switch off the main power switch before making any electrical
installations. Do not switch off the direct power supply (3. Direct Supply in the figure above)
if you wish the electric bilge pump to keep operating while you are away. However, do not
forget to switch off the refrigerator, stove, chart plotter, possible radio, etc., since these are
all supplied by the direct supply.
NOTE!
Remember also to switch off the main power switch before making any
electrical installations.
NOTE!
Never switch off the main switch while the engine is running! It can cause
serious damage to the engine’s electric system.
NOTE!
Do not perform electric installations (such as changing lamps) when the power
is on. Leave any larger installations to professionals.
